Well after several hours later, I have managed to take "Mildew's Haunted House" and turn it into "Mildew's Manor."
In addition I have fixed the high-score saving by using CARTDATA() instead of CSTORE().
It is still of concern to me that current PICO-8 is limited now to 256-bytes whereas earlier versions allowed you to have up to 8192 using CSTORE().
A discussion for this can be found HERE:
https://www.lexaloffle.com/bbs/?tid=31608
If you want to see animated screen shots and additional instructions for this game, there are 2 links:
https://www.lexaloffle.com/bbs/?tid=27999
https://www.lexaloffle.com/bbs/?tid=27942
To see Haunted House initial animation cart (which is not used now), go HERE:
https://www.lexaloffle.com/bbs/?tid=27925
If you have any questions about this game, feel free to let me know.
Now that I've finished all the tedious stuff and lab 
work, I can get to work on what I want to.
4 comments
To Do List:
- Reverse Engineer collision system and rework into a detection system for character shadows and slower speeds on stairs.
- Overall world design.
- Objectives/Collectibles?
- Fine tuning of 'animated' water.
- Character shadows need to be separated and overlayed on top of the character sprite to prevent flipping.
-
Polishing of Character animation or control. Animation needed for facing upwards, unsure if character should run diagonally automatically.
Any other tips or opinions would be really helpful!
5 comments
I've been studying Pico-8 only for about a week now and really having a good time. I enjoy thinking within it's constraints. In particular I like fiddling around with the graphics memory directly to do fun video effects.
With the following code snippet I can move every other video line offscreen to the left or right, giving an interesting "tearing apart" video effect. This works great and is very fast, and gets me to a blank screen where "blank" just means the screen is filled with a chosen "clear color."
if (y%2==0) then memcpy(dst,src,63) memset(src,clear,1) else memcpy(src,dst,63) memset(src+63,clear,1) end |
So, now that the screen is clear, I want to do the opposite. Bring in a full screen image (perhaps a map or scaled sprite) onto screen in the reverse. i.e. Odd-lumbered video lines scroll in from the left and even-lumbered lines scroll in from the right.
This would assume that some pre-composed block of memory is waiting from which i do a similar memcpy() from off-screen to on-screen... or at least that is conceptually what i think needs to happen. But i do not understand the possibilities of Pico-8 deeply enough to understand how/where to keep such an offscreen buffer, or if that is even possible.
Any pointers on how to tackle this?
6 comments
Okay, there is a thing called fate, and there is a thing called destiny. WOW ! Check this out. Minutes BEFORE I posted this, I found my old compressor revived and updated by Jasper.
https://www.lexaloffle.com/bbs/?tid=27892
Hmm ... I sure hope the work he did doesn't completely mirror what I've been slaving days over. :)
Okay, yes, new compressor. How does it work ? Very simple.
It takes a memory location and length and converts it from 8-bit binary data to 6-bit text data.
But it does more than that, it also compresses that 6-bit data and with a LEVEL in mind.
Likely you won't need anything more complex than 2, but it can go all the way up to 255 if you need it to.
Here's how to use it, for instance, to make a logo screen for your game.
From command mode use: IMPORT IMAGE.PNG
4 comments
Hello! I love Pico-8, however I've been trying to find out how to do collision. I've done tons of stuff, however the closest I get does the job for some games. However it can't slide.
Let's say you could move the player in 8 directions top down, and there's a wall on your right. If I hold right, I will run into the wall, however due to the way my code works (and I've tried different ways) if you hold up and right, instead of just going up it just makes you stay there. Meaning it's hard to get into 1 tile gaps in walls.
I've also noticed platformers are hard to do as well, as my code checks each corner, I have no way to check what direction a wall is, meaning if you're jumping while running into a wall, when you get to the top and only one corner is touching the wall, it makes you stick.
So is there any good collision systems that is easy to understand, and allows sliding? Thanks. :)
2 comments
Directions:
Help Hungry Bird eat the Bird Seed!
arrow keys for movement
Z to restart
(You have only two seconds to eat each piece of birdseed.)
Hungry Bird is a game by my son and I. He created & coded the game, but I did the sprite work. It's our first Pico-8 game.
0 comments
Hey All! I am new to Pico-8, just found it last week. I whipped up this game "Sushi Boss" while recovering from some surgery, I was pretty out of it so I'm very pleased with how far along it actually is.
It's totally WIP, missing music and its really hard and has no instructions, but I have beaten it once and friends have made it to level 2 so thats a good sign!
Use the arrow keys to either select something on the cutting board or to select prepped ingredients above.
Use X to either chop an ingredient or add it to the roll.
Use Z to make a roll!!
Fulfill customer wishes to get more stars and work your way up to Futo Maki!!! MAKE SUSHI BOSS PROUD!!!
0 comments
I'm trying some animations, but i can't make the sprite rest. Any suggestions?
actor={}
actor.x=40
actor.y=30
actor.sprt=0
actor.spd=0.75
function move_d()
actor.sprt+=0.125
if actor.sprt>2.9 then
actor.sprt=1
end
end
function move_u()
actor.sprt+=0.125
if actor.sprt>18.9
or actor.sprt<17 then
actor.sprt=17
end
end
function move_r()
actor.sprt+=0.125
if actor.sprt>4.9
or actor.sprt<3 then
actor.sprt=3
end
end
function move_l()
actor.sprt+=0.125
if actor.sprt>20.9
or actor.sprt<19 then
actor.sprt=19
end
end
function _update()
if btn(3) then
move_d()
actor.y+=actor.spd
elseif not btn() then
actor.sprt=0
end
if btn(2) then
move_u()
actor.y-=actor.spd
elseif not btn() then
actor.sprt=0
end
if btn(1) then
move_r()
actor.x+=actor.spd
elseif not btn() then
actor.sprt=0
end
if btn(0) then
move_l()
actor.x-=actor.spd
elseif not btn() then
actor.sprt=0
end
end
function _draw()
cls()
spr(actor.sprt,actor.x,actor.y)
end
|
0 comments
Still working on some features but this is a program that draws Hilbert Curves, a type of space filling fractal. This was mostly an exercise to learn how to use recursive functions but I've also wanted to make a program like this for a very long time.
1 comment
Try as I might, I just don't have the brainpower to figure out how to compress data from decompressed 8-bits to compressed 8-bits. Now I can neatly do 8-bits to 6-bits, compressed, and back again, but not straight 8 to 8.
The problem I am running into is I want to use one of the bytes # (0-255) to represent a compression mark. I am scanning the entire frame of memory desired to be compressed for the one number in the data this is used least (in many cases, it appears zero times).
The problem is, that particular byte # might also be just data if there is one or more of these bytes occurring.
Now you would think you could simply go through the data and store a zero at the end of that signature byte to tell the computer that this is data, and not a compression mark, but then if you search for multiple instances of patterns for compression later, it is still possible to get that elusive byte as part of your data when it needs to be just a marker - thereby corrupting your compression.
Suggestions ?
5 comments
Before to start play it is recommended to read the rules menu for a better comprehension
Tiny Tiny Duel is a strategic game and created for the #LOWREZJAM2018. In this card game you should made duels versus the IA to improve your cards and upgrade your stats. The IA has 3 levels of difficulties. All rules are detailed in the rule menu.
This game is composed of 15 cards and stats player
5 x power cards
5 x healing cards
5 x monsters cards
Life player
Attack player
For browse in the game
Use arrows for browsing
X for Validate/Pick
C for going back
Choz.
1 comment
Hey all,
Hopefully it doesn't seem too spammy to start a new thread instead of updating the old one, but the old thread got pretty huge (including the original post), so instead of adding more to it, I figured it best to start a new thread.
For those who don't know, PlayPico is my personal curated list of only complete games (see the original thread if you're curious as to how games qualify for the list, why some might not be there, etc.)
WE BROKE 500 GAMES!!!
Finally, after almost 2 years of PlayPico history and 3 years of PICO-8 itself, we've hit 500! Great job to everyone who made these amazing games, and keep 'em coming!
We got a facelift!
This has been a long time coming, as PlayPico needed a facelift for a long time. The old version was pretty much just using Bootstrap 3 in its default state. This is because the site started off as something just for myself that I ran locally on my computer and wasn't public anyway, and also my concern was mostly with developing the server-side aspect, so I tossed together something that would look decent with as little effort as possible. Bootstrap has been [i]completely
15 comments
Update August 20th, 2018: Slight change to show 15 color rectangles instead of only 7. This is not a song-related change.
Credit to Zep for the code base.
3 comments
The cart is quite self explanatory, I think. If you want to have some saved data, you can se the source code to see how this was made!
This works in:
- The PICO-8 editor (tested on windows & PocketCHIP's Linux)
- The BBS webplayer
1 comment
Hi all!
I put together a small Sokoban Framework which (hopefully) allows pico-8 devs of any skill level to quickly and easily make their own Sokoban games. If you're interested you can find it here! The cart in this post is a game I quickly put together as an example of how to use the framework.
If you end up making a game within it please let me know, I would love to see it!
Also, credit where credit is due. This framework was inspired by Stephen Lavelle's puzzlescript.net
0 comments