the first one u linked doesn't seem to be in a function and I can't read it well enough to put it in one to try it out
the second one you linked doesn't fit what I need and when I tried to fix it it doesn't draw right
@freds72 u mean this one?
this uses weird arguments as it doesn't let me specify a height
function rspr(sx,sy,x,y,a,w) local ca,sa=cos(a),sin(a) local srcx,srcy,addr,pixel_pair local ddx0,ddy0=ca,sa local mask=shl(0xfff8,(w-1)) w*=4 ca*=w-0.5 sa*=w-0.5 local dx0,dy0=sa-ca+w,-ca-sa+w w=2*w-1 for ix=0,w do srcx,srcy=dx0,dy0 for iy=0,w do if band(bor(srcx,srcy),mask)==0 then local c=sget(sx+srcx,sy+srcy) sset(x+ix,y+iy,c) else sset(x+ix,y+iy,rspr_clear_col) end srcx-=ddy0 srcy+=ddx0 end dx0+=ddx0 dy0+=ddy0 end end
also if you mean the first one then it doesn't work properly for example putting in 32 for argument s should be tile 0,2 but its not.
EDIT: something like sprr(s,x,y,w,h,r) should work
You can’t put height because I only ever needed to rotate square sprites!
Adding a height should be easy.
Note that this version actually writes to the sprite sheet, replace sset by pset to draw on screen.
EDIT: something like sprr(s,x,y,w,h,r) should work
Sorry, that’s Pico-8, either you roll put tour own sprr function or work with what other did.
Don’t expect someone else to do your own code!
ok sorry so I took a try at it from the top of my head and got this...
function sprr(s,x,y,w,h,r) local xr=sin(r/360) local yr=cos(r/360) local sx=flr(s%16) * 8 local sy=flr(s/16) * 8 for yy=sy,sy+h*8-1 do for xx=sx,sx+w*8-1 do local dc=sget(xx,yy) -- this should get the rotated loop position local dx=x+(xx-sx) * xr local dy=y+(yy-sy) * yr pset(x+xx,y+yy, dc) end end end
however dx and dy is not correct do you know what could be wrong?
To have a clean rotated sprie with no holes, you must go through the target region (eg square ir rectangle) and get the rotated pixel that should be at position. Suggest to read the Dr Dobbs article I took the code from (linked in the post I mention)
@freds72 can you tell me what I am doing wrong with dx and dy?
so here is another attempt to create it..
function sprr(s,x,y,w,h,r) local rx=cos(r/360) local ry=sin(r/360) local sx=flr(s%16) * 8 local sy=flr(s/16) * 8 local ex=sy+h*8-1 local ey=sx+w*8-1 local rr=ry*ry+rx*rx for yy=sy,ey do for xx=sx,ex do local dx=( ry*yy+rx*xx)/rr+w local dy=(-ry*xx+rx*yy)/rr+h local dc=sget(dx,dy) pset(x+xx,y+yy, dc) end end end
based it on this.. https://www.lexaloffle.com/bbs/?tid=2189
@freds72 so this time I tried my best to follow the dr dobbs tutorial and reference it to yours and I got this..
function sprr(s,x,y,w,h,r) local sx=flr(s % 16) * 8 local sy=flr(s / 16) * 8 local sw=w*8 local sh=h*8 local dx=x local dy=y local dw=w*8 local dh=h*8 local colx = sin(r/360) local coly = cos(r/360) local rowx = coly; local rowy =-colx; local srtu = sx - (dx * coly + dy * colx); local srtv = sy - (dx * rowy + dy * rowx); local rowu = srtu; local rowv = srtv; for y=0, dh do local u = rowu local v = rowv for x=0, dw do local su = ((u < 0.0 and -u or u) + sw) % sw local sv = ((v < 0.0 and -v or v) + sh) % sh pset(dx+x, dy+y, pget(su, sv)) u += rowx v += rowy end rowu += rowx rowv += rowy end end
can you please take a look at it and tell me whats wrong?
Looks like a plain typo:
(that is read from spritesheet, write on screen)
edit: you are not iterating over the right direction:
Otherwise, looks ok (it’s fine to start with a very verbose version and optimize after)
@freds72 thankyou for the reply.
is there any optimizations I could make besides ingnoring color 0?
also I see your version has a mask so it doesn't draw outside of the source tiles, but I had a hard time understanding it can you explain how to do that in mine?
@freds72 I was messing around and I came up with a compact version.
the only problem is that it seems to rotate the src pixels and slows down at certain angles
function sprrt1(s,x,y,w,h,r) local spx=flr(s%16)*8 local spy=flr(s/16)*8 w*=8 h*=8 r=r/360 for iy=0,h do for ix=0,w do local sx=spx+ cos(-r)*ix+sin(-r)*iy local sy=spy+-sin(-r)*ix+cos(-r)*iy local sc=sget(sx,sy) //local bnd=sx<spx or sy<spy or sx>spx+w or sy>spy+h //if sc>0 and not bnd then pset(x+ix,y+iy,sc) end end end
edit: i wanted it to rotate around center
can you at least fix your version then so it takes in a height parameter?
this is basically your code but with h implemented and mask taken out because I don't know how to do the mask with h included.
it also has a bug where it rotating the src rectangle.
function sprr(s,x,y,w,h,r) local rx=cos(r/360) local rx=cos(r/360) local ry=sin(r/360) local sx=flr(s % 16) * 8 local sy=flr(s / 16) * 8 local ddx0=rx local ddy0=ry w*=4 h*=4 rx*=w-0.5 ry*=h-0.5 local dx0= ry-rx+w local dy0=-rx-ry+h w=2*w-1 h=2*h-1 for iy=0,h do local srcx = dx0 local srcy = dy0 for ix=0,w do local c=sget(sx+srcx,sy+srcy) pset(x+ix,y+iy,c) srcx -= ddy0 srcy += ddx0 end dx0 += ddx0 dy0 += ddy0 end end
if your not going to help people adapt your code for something that should have been implemented to begin with, then why did you even post a link to your code in the first place?
[Please log in to post a comment]