Log In  

Here's a repo with the code and more details on GitHub

PICO-8 has a GPIO interface supporting 128 pins, each of which can store a 128-bit unsigned integer (0-255). However Raspberry PI and CHIP only support consuming each GPIO pin as a single bit (0 or 255), and only have pins for a small subset of the 128 virtual slots. The Pocket CHIP only has 6 fully-exposed pins (indices 2-7).

This means that if you want to pass GPIO information that can be used easily with any platform that runs PICO-8, you only get six on-and-off slots, which doesn't sound that great. Until you consider that you can still use those 6 slots to encode an integer up to 6 bits (-32 to 31 signed, or 0 to 63 unsigned!). Even a 3-bit int (0-7 unsigned) can often be enough to encode meaningful state information for many games, which can be used to trigger vibrations, color lights, etc.

The trouble is, taking a decimal value and encoding it as binary with PICO-8's built-in GPIO functions, then reading it again later, is not simple. PICO-8 Messenger provides utility functions which abstract away the bit-shifting and let you just read and write numbers.

Usage

Copy the functions you need from pico8-messenger.lua into your .p8 file.

-- included definition for write_gpio
-- included definition for read_gpio

-- write the number -1 to bits 2 through 4
write_gpio(-1, 2, 3)

-- print out the number stored in bits 5 through 7
print(read_gpio(5, 3), 8, 8, 7)

You can download pico8-messenger.js and include it in your page with a script tag:

<script src="pico8-messenger.js"></script>
<script>
  pico8_gpio = pico8_gpio || Array(128);

  // get some number stored in bits 2 through 4
  var numFromPico8 = readFromGpio(pico8_gpio, 2, 3);

  // send the number 2 to pico-8 stored in bits 5 through 7
  writeToGpio(pico8_gpio, 2, 5, 3);
</script>

API

For all of these functions:

  • num is the decimal integer to be stored
  • pin_index or pinIndex is index in the GPIO array (0-127) where storage for this number should begin (in other words, the location of the largest, left-most bit)
  • bits is the number of bits required to store the maximum value for this number

Lua

These functions wrap PICO-8's peek and poke functions to read and write data in the GPIO slots.

function write_gpio(num, pin_index, bits)

function write_gpio_unsigned(num, pin_index, bits)

function read_gpio(pin_index, bits)

function read_gpio_unsigned(pin_index,bits)

JavaScript

All of these functions assume gpio is a 128-length array filled with numbers that are either 0 or 255. Although these are intended for handling PICO-8 data, they can be used anywhere it could be useful to encode numbers in a binary array.

function writeToGpio(gpio, num, pinIndex, bits)

function writeToGpioUnsigned(gpio, num, pinIndex, bits)

function readFromGpio(gpio, pinIndex, bits)

function readFromGpioUnsigned(gpio, pinIndex, bits)

How many bits do I need?

Check out this table on GitHub

P#51406 2018-04-08 06:15 ( Edited 2018-04-08 10:53)


[Please log in to post a comment]

Follow Lexaloffle:        
Generated 2020-08-06 10:24 | 0.010s | 4194k | Q:12