Tempest 2000
what you get
- 99 stages
- 10 enemies
- all powerups
- 1 good music track (by zenith320)
- 1 bad music track (by me)
- mouse and spinner support (may not work on unofficial pico8 players)
- beastly mode (finish all 99 stages to unlock)
- bonus stages (not same as jag original)
0.9.8 changelog
- gamestation go spinner support (turn on in options) requires gsg sd card 2.7
- gamestation go seems to experience slowdown if mouse is enabled so don't turn on the mouse
- you'll still need to press down on the dpad/stick to jump because pico8 only has two buttons :(
- improved high score entry screen
- flag pure (start from stage one) and beastly mode high scores
- fix powerup order bug when getting ai droid reward
- tweak beast interactions with particle laser
- fix losing warp tokens if you died with three before stage finish
0.9.7 changelog
- remove crt adjust / tate mode
- used freed space from previous to add bonus stages
- performance improvements
- add WHATSNEW to titlescreen
how to play
- left/right move your ship around the web
- o shoots, x fires your super-zapper
- up changes camera (normal, fixed, close)
- down jumps (after collecting power-up)
- mouse options (when enabled)
- left button shoots, right button fires super-zapper, middle button jumps
- sensitivity: how far the mouse makes you move
- flick jump: flick mouse up/down to jump, value is sensitivity
- mouse options should also work on usb spinners for arcade feel
about
based on Tempest 2000 for Atari Jaguar by Jeff Minter and the original Tempest by Dave Theurer.
features all stages, enemies and powerups of the original atari jaguar version of tempest 2000. mouse and spinner support (if your pico8 player supports it), and high score saving. custom bonus stages designed by me to fit in what little space was left after implementing everything else. gameplay reverse engineered through hundreds of hours of playing tempest 2000 and staring at the original 68000 asm source for the jaguar version.
excellent
Jeff Minter saw my demake and had some choice words of praise! that's my first time ticking off a bucket list item. if you stumbled onto this without knowing the source material, make sure you go track it down.
sources
- unminified and yet probably unreadable source available on my github
- uses shrinko8 for code minification and letting me pretend i was using c (look at my enums.p8!)
- uses parens-8 v5 bytecode virtual machine to reduce token usage.
- special thanks to freds72 of poom for feedback, tips, and polyfill code.
- i'm not a 68000 guy but the outstanding comments in the original t2k for jag source helped me parse quite a bit of what was going on.
- also check out tempest vs tempest which a fantastic teardown and comparison of the arcade original with t2k which kicked off my interest in even taking a stab at this.
if you like it go buy Atari 50 or Llamasoft: The Jeff Minter story which include the Jaguar original.
crt and misterfpga support
removed crt adjust mode - the extra space the implementation took i felt could be better used for implementing the bonus stages, which were the biggest missing thing. it'll still work fine on crts, it'll just be slightly squished.
cheats
ps if you'd like some cheats get a high score (jools shouldn't be hard to bump off) and put in:
- RIMMER - unlock all stages
- KRYTEN - unlock beastly mode
- HOLLY - unlock all beastly mode stages
alpha .5.2 update
- removed debugging function where pressing 'up' immediately sent you to the high score screen sorry about that
alpha .5 update
- all enemies added and functional. all 99 stages now playable
- further web/enemy color tweaks
- on screen messages and bonuses overhauled. enjoy text flying at you
- actual title screen with actual logo
- buggy high score screen
- crt adjust temporarily disabled while i implement other features
- no new music or sfx yet but have had offers to make some so hopefully in next release
- next update will be quite a while, totally out of tokens so implementing bytecode vm to handle enemy logic/state machines
alpha .3.3 update
- added crt adjust option to compensate for vertical compression when playing on a 15khz CRT via the MiSTerFPGA PICO-8 core
alpha .3.2 update
- LOL forgot to test if mouse buttons did anything. they now shoot and super zap
- added mouse jumping option. enable it and move your mouse rapidly up/down to jump it probably sux
- mouse jump threshold selects how far up/down you move it to trigger a jump
alpha .3.1 update
- fix tankers not rotating
- redid colors for many enemies
alpha .3 update
- mouse support w/settings (let me know what feels best)
- mouse sensitivity is how far moving the mouse moves you
- mouse max lanes is the cap on how far you can move in a single frame
- even when using mouse jump will be mapped to down not sure how to work around that
- camera working (mostly) properly with stage transitions
- changed claw to filled graphic
- fixed bug with pulsar/fuseball tankers spawning super flippers
alpha .2.1 update
- score rollover bug finally fixed*
- 1-ups (extends for modern shmuppers) every 20,000 points
- messages are overlapping pretty badly now, need to figure that out but pretend it's intentional visual information overflow
thanks to freds72 of poom for showing how to use full 32-bit precision instead of being stuck in 16.16 fixed point, and go check out poom seriously it's great if you think this port's impressive you ain't seen nothing yet.
score_table = {
[FLIPPER] = 150*0x0.0001,
[TANKER] = 100*0x0.0001,
[SPIKER] = 150*0x0.0001,
[FUSEBALL] = 500*0x0.0001,
[PULSAR] = 200*0x0.0001,
[FUTANKER] = 100*0x0.0001,
[PUTANKER] = 100*0x0.0001,
[SFLIPPER2] = 150*0x0.0001,
[BEAST] = 150*0x0.0001,
[SFLIPPER3] = 150*0x0.0001,
[SPIKE] = 3*0x0.0001,
[SPARK] = 150*0x0.0001
}
game_score+=score_table[self.type] or 0
print("score:"..tostr(game_score,2),0,0,7)
|
alpha .2 update
this update brings us close to the full gameplay of the jag original. only two enemies remain to be implemented. this update also maxed out the 8,192 token limit and i'm out of low-hanging fruit to optimize so it may be a bit before the next update. aka a vm is back on the menu.
also working on a color/palette/shape overhaul. some of the models are still iffy and colors don't change between phases and many are outright wrong.
also have very few sound effects implemented. working on those as well.
- 56 stages available
- added four more enemies
- objects that should rotate now rotate
- fixed several existing enemy graphics
- rendering now prioritizes by distance
- added ai droid powerup
- added janky flipper sound effect
- stage transitions now let player move/interact
- death animations still suck
- score rollover bug still present because i forgot about it until i started to type this post
alpha .1.2 update
- changed flashing text to yellow before i kill a playtester
alpha .1.1 update
- fixed enemy shot threshold
- decreased flipper flip delay
- increased player shot cooldown
- mostly fixed particle laser interactions with beasts (graphics still off though)
- score still wraps around but pretend it's whose line and the points don't matter... yet.
i'm a big fan of and occasional contributor to the MiSTerFPGA project. there's a new core available for it which lets you run PICO-8 games, and even outputs a 15khz signal so if you have a TV of the correct vintage laying around you can do this.
This is amazing. Well done!
FWIW i loved the reggae music and relaxing on the bonus "strips of bacon" levels.
Thanks so much Matt! Unfortunately I’m not a music guy so the one totally awesome song I do have is thanks to zenith320. Part of the reason I keep updating and spamming it so much is to try and drum up more contributors on the sound side to help flesh it out. It’s definitely the most lacking part, T2K deserves better audio than I can give it :D
Bonus levels are iffy right now - I’m doing a big refactor to free up the tokens to get the rest of the content in so they’re something I don’t plan on thinking about until I get through that. I don’t have a lot left to implement before it’s “feature complete” but I’ll still headroom for the presentation stuff (menus, better transitions, the other cherry on top stuff we all take for granted until we spend sixty hours straight playing T2K for research and taking notes…)
Wonderful. I loved this on the Playstation 1, great to be able to play it again.
Thanks for making this demake. Tempest 2000 is an absolute retro gaming classic, so Pico-8 version is highly appreaciated. I can't say I was ever good at it and it doesn't really have any nostalgic value for me since I'd only discovered it on YouTube's retro gaming channels like Steve Benway some time in late 2000's / early 2010's, but I can tell when I see a game with a great gameplay loop. And as you can see on the screenshot down below, I've even managed to get into high score table thanks to mouse controls. Didn't think I could do it at all.
A star, a heart and a Pico-8 Adventures video from me ;)

I'll be honest: WHY ISN'T THIS FEATURED ON THE PICO-8 FRONT PAGE YET?! It's awesome and really faithful to the original Jaguar version to the best of Pico-8's abilities. A top-notch classic remade in the most caring way possible. <3
Had to sign up just to comment.
Incredible piece of work, well done.
All time classic and it was my favourite shooter for a long time, until Yak released TxK (an update to this) on the PS Vita!
Ps vita mentioned, might have to try it.
Had a little play through this and I'm loving it. Keep imagining it on the dj hero turntable as the way to move the player
I've been considering the Atari Gamestation Go with it's spinner for a while. I had hoped it would include the Jag and T2k, as why else would you have a spinner (classic Tempest is on it) but it's just not powerful enough.
Now there are custom firmwares and that includes Pico 8. Is there a chance this could work with the spinner?!
That could tip me over the edge of the cliff.
(Despite buying an Odin 3 and a Steam Machine this month!)
TxK was the pinnacle for me. Headphones, dark room and the Vita's OLED. Gaming Nivarna/digital crack.
Tempest 4K on the Steam Deck OLED (or my 55" Ambilight OLED TV) is almost there, but I think the Vita and OLED at the time was just so new and exciting.
@Misfit thanks for the love! i'm super proud of how it turned out. regarding the gamestation go and general spinner support: it'll depend on what pico8 player the device runs, and what type of controller the spinner is treated as. I don't have one and haven't had anyone try it on one yet so I'm not sure how it'll work. I do want spinners to be as supported as possible which is why i put pretty broad sensitivity settings in the mouse options (usb spinners on computers are usually treated as mice.)
Another thing to keep in mind is that PICO-8 only has two buttons. That's why I had to put jump on the "down" direction. When it's using the mouse (which warns the user is "dev-kit" mode) I enabled jump on middle-button (mouse-wheel) click and also have the "mouse flick" option, but I don't know how/if handhelds will let you map those.
I have an RG Cube XX on order that I'm going to do some testing on. It doesn't have a spinner though. :(
I'm seriously considering packaging standalone versions with a hacked player to work around those control limitations - although I'm not sure yet, since part of my goal was to see just how good it could be while sticking strictly within stock pico-8, only one cartridge.
@lastofavari so glad you enjoyed it and looking forward to seeing your video! and i'm still working on it so if you have any feedback or i notice anything in your review i'll see what i can do. this project has been such a delight to work on.
@Astralsparv i've seriously considered getting a playstation tv and putting CFW on it so i can play txk on my HDTV, even though tempest 4000 is basically txk and i already have that on my ps5.
@deepthaw I got a PS TV for exactly this reason (something I probably should have kept) but it just didn't work for me. Probably the crappy PS2 controller or the fact I basically got trained to the game being a foot away from my face meant I never got on with it.
And now I can only play T4K well on my Steam Deck, on the Xbox/PS5 I'm much worse at it.
@deepthaw if you're considering doing that; I'd also suggest a normal PS Vita if you care for the handheld-ness/portability of consoles. You can also setup a dock for it by just plugging in the usb to a PC (or a raspberry pi with some software to make it act as a dock similar to the switch), though it's at slightly degraded quality compared to on the handheld itself, being either full res 30fps or slightly lower res 60fps.
If you don't care for playing out and about though, go wild with the PSTV!
I also made (possibly the only, couldn't find others) general use support for the DJ Hero PS3 controller; and with a bit of time and effort you can definitely setup something to read the data from the spinner and convert it into pico-8's controls. If it is the mouse, it's even easier since you can just read that; or even make a mod of the pico-8 cartridge to use the mouse with stat() instead of the buttons.
On linux, if that's what the gamestation go is using, I think it'd be easier; I used vigem for my DJ Hero thing and it just made it bleh to setup, but I know you get alot easier control there, especially if it's a more supported controller/input device.
Good luck!
it looks like the spinner can work on the gamestation go, using the official pico8 player. sensitivity will inevitably end up needing tweaking but once people with gsg's say what works i'll expand the sensitivity settings in game (if needed) to let people set it there. (from what i hear, the gamestation go's spinner isn't exactly great, but it's probably the most common spinner out there so i want to make it work.)
https://forums.atariage.com/topic/361263-custom-firmware-for-atari-gamestation-pro/page/38/#comments
@Astralsparv already have a CFW enabled Vita and love it, and played quite a bit of txk while working on this (even if i didn't steal any mechanics from it.) the ps tv would be for the sake of having a similarly CFW device with HDMI output. i've tinkered with bluetooth plugins to use assorted controllers so the controller shouldn't be an issue (i hope...)
Fair enough, I always plug mine into my PC directly and use OBS so I don't need the HDMI output. I wonder if you could just get a small adaptor to convert the display signal (what https://github.com/xerpi/vita-udcd-uvc sends to displays). Not sure the details of how those stuff work I just know it comes up as some form of display capture/camera device that I can just add on OBS. Raspberry Pi setups do give that dock setup with HDMI output and might be cheaper, though.
Love seeing other people in the vita space though, good luck with your PSTV or if you try other stuffs :3
And oh me oh my I love seeing the support for these niche control schemes, people here can be so cool..
0.9.7 released!
Biggest update here is the addition of bonus stages. I removed the code that was handling CRT adjust and TATE/screen rotation, and along with some other consolidation techniques in how I pack data, I was able to free up enough space to implement bonus stages.
These are not the bonus stages from the Jaguar original. My reasoning was twofold:
- being as tight on space for features as I am, I decided to design something that could reuse as much of the existing engine/assets as I could.
- the bonus stages were a unique issue if you were playing with a rotary controller, because many of them required that you switch back to a dpad/joystick for 8-way movement. i intentionally designed this bonus stage to function with just a spinner/mouse if the user is using one.
the bonus stages also include an awful music track i assembled myself by disassembling protracker modules, transcribing pattern data by hand, and then trying to recreate samples that kinda sounded like the originals. it's not great but it works.
the bonus stages should make warp tokens/the high scores actually mean something now. the existing behavior of just skipping several levels if you got three warp tokens was somewhat punitive since you got nothing else out of it, you just missed the opportunity to get points on the stages you skipped. (although it helped unlock levels faster if you use stage select.)
Surprised how well this played just using the webpage on my iPhone with a Pocket Taco or Mcon.
I was going to complain that I couldn’t lean into the adjacent lane and that using a super zapper didn’t save you when being pulled into web bit it appears those came in n TxK!
The few times I’ve had a Yes Yes Yes and getting the AI droid as the first powerup next level I, didn’t seem to ever get a particle laser, but I guess that could also be correct?
What do you do on the bonus level? I died quickly!
Ummm. Ummmmmm. Ummmmmmmmmm.
Yeah, my immediate reaction: I have no words. Absolutely incredible stuff. Really, truly.
Exactly, the funny thing is even the missing samples don't matter too much.
In my head I'm still hearing 'Supper Zapper Recharge' and 'Yes! Yes! Yes!'
Gamestation Go spinner is supposedly lacking as you say. But what other device out there even has one?!
There is a seller on Etsy that sells weighted replacements that apparently make a huge difference, but with the approx £30 shipping to the UK I can't really justify spending £64 for a bit of plastic!
(But then I did buy a Jag, a Nuon and a Vita primarily for these games!)
Unfortunately the GSG spinner/paddle issue is that it acts like a controller being tapped repeatedly. That would not work here since I apply the same small acceleration to dpad inputs that the Jaguar original did (it was the first thing I looked up and how I found the Jag source because I didn't want dpad control to suck.) So you'd probably just spaz out in place or move erratically. Mouse inputs bypass that and every other spinner I'm familiar with acts like a mouse that only has an x axis. :(
@Misfit bonus levels you want to hit the powerup rings while avoiding the pulsars. if you can fill the megaspeed bar before the level ends, you get 20,000 points and warp several levels ahead. i tried to match the points awarded to what you'd get doing the bacon stages from the original, and added the pulsars as a way to help people to practice dodging them since spinning in a tube was pretty boring otherwise. I might have been able to fit the bacon stage in but I know a lot of people are preferring a mouse and didn't want them to have to change control schemes mid session just for bonus stages.
the other behaviors (superzapper rescues, leaning into lanes) are both txk/t4k additions. i wanted to add the lean/shot but ran out of buttons. i'll double check the powerup progression and see if that needs to be corrected.
@Misfit I lucked out too - I was considering buying one myself too but apparently it also has slowdown on GSG that doesn’t occur on “official” platforms even though the GSG can run the official player. That’s a lot of money when I can just grab something from anbernic for far less - and if the spinner is jank it’s not like I’m missing out on anything. (Cube XX is on the way.)
If I have time I’ll see if I can fit in some LOD adjustments to reduce slowdown although it seems to be substantially reduced with my latest update. (I did most of my slowdown testing by jumping to stage 99 because the beasts have multiple filled polygons and there’s a lot of them.)
@deepthaw I'm sure I'll get one one day, Amazon.com seems to be the way to do it, they add on the VAT and delivers in a week. Nearly pulled the trigger at £120 a little while back, but currently at £165 (of course for some reason I'm assuming you are in the UK)
Is there somewhere I can donate to you? I think I'll try this on a few of my handhelds and see how it goes.
Just tried the mouse and it's great, I did loads better, but playing on a laptop/pc defeats the point a little as I could play the real T2K. Having it on something pocketable is the key...
I assume what you mean about it acting like its being tapped repeatedly is similar to how the turntable records its data. It's basically a delta of how much it's moved? Might be misinterpreting though. With some translation layer you might be able to make it work well, that's what I did for the turntable (also since I had to figure out what bytes do what since it just did not like computers)
@Astralsparv not sure - I don't want to bug the people already digging into it to start logging SDL events for me. I may just add a spinner-friendly disable acceleration option and leave it at that. The real crime here is Atari making a handheld with a spinner that's not powerful enough to emulate Jaguar and not at least commissioning a remake of T2K (did T4K even hit the gamestation go or pro?)
us tempest fans are so underserved. we are few but dedicated!
@deepthaw the GSG/Pro aren't even close to powerful enough to play T4K. I'm pretty sure it's available for the new VCS they released.
You're right it is criminal the GSG can't emulate a Jag as it has a spinner, but T2K never officially supported a spinner and there was never a Jag spinner (I had a Jag and modded spinner controller once and to this day can't believe I sold it and for how little...), so I guess outside a few of us no one cares!
Should this work with Fake-08? I just tried getting it to work on Onion OS/Retroarch on my Miyoo Mini but it throws a can't find carts error that Gemini tells me is a generic fallback error and the cart probably doesn't work with Fake-08
Vita emulation never seems to be discussed much when I'm watching device reviews and general scene chat, but I've just found that TxK will run perfectly on Vita3000 on my incoming Ayn Odin 3. Now that is quite exciting...
It will also be interesting to see how it handles the Steam version of T4k.
0.9.8 released!
Thanks to some folks on the AtariAge forums and littaum on Discord, Gamestation Go spinner support has been added. You can turn it on and tweak the sensitivity in the options menu. The GSG spinner "spins" by sending repeated left/right presses so I disabled the acceleration curve on inputs when it's enabled. This support requires the Gamestation Go SD Card 2.7 which is basically custom firmware. I think, I don't have a GSG.
You'll still need to press down to jump unfortunately since PICO-8 is limited to two buttons. Performance issues on the GSG seem to be the result of enabling the mouse causing considerable slowdown - an issue I can't reproduce on other devices, but since the gsg spinner doesn't use mouse mode it shouldn't be an issue.
I also hardcoded all movement paths to prevent moving more than one lane in a single frame (which would have allowed you to move right through enemies without checking for a collision if your sensitivity was stupid high.)
Few assorted bugs fixed as well, including one noticed by @Misfit where getting the "yes yes yes" bonus AI droid resulted in skipping the particle laser. Made up for it by making particle laser slightly less lethal on beasts though, sorry.
High score entry screen has been fixed up some, including letting you mash a button to put the same initial in repeatedly like a real arcade machine. It also tracks "pure" (start the game from level 1) and beastly scores and flags them as such in the high score table. Still only enough space for five scores overall though.
Few helper messages added too (up for camera, down to jump) for those unfortunate souls who stumble upon it without seeing the controls on here.
@Macs75 if you don't think Atari will freak out over seeing it featured on an app on the app store, sure. I'd hate to see them cause you any trouble and risk your dev account or anything.
@deepthaw yeah Atari is litigious as much as the big N. on those things, Jeff Minter had his issue with them for TxK. I think I will have to renounce including it unless I get authorization from Atari itself (hardly).
Nice update, but I'm resisting the GSG....
For now.
Should it work on Fake-08? I'm new to PICO stuff.
Hey... just wanted to say that this game is amazingly impressive. Tempest 2000 for the Atari Jaguar is one of my favorite games and the fact that this is about as perfect an adaptation/recreation as you can get, I am a very happy old man. I still have my Jaguar and play this game religiously. But playing it on the Pico8 platform is so much fun. I play and love every Jeff Minter game. Thank you for the hard work.
@SiniScope thanks so much! It was a passion project and I'm super happy with how it turned out, and even happier people are enjoying it!
@Misfit If I get a chance to hook up the Vita (i think Fake-08 is on there) I'll give it a spin and let you know.
The cart icon or word on the bottom left of the preview should link to an.p8.png you can use in a pico8 player.
[Please log in to post a comment]




